Product category
Curing Agents
Peroxide and addition-cure systems matched to your base compound and process.
About this material
Curing agents determine how a silicone compound sets. The right choice depends less on the agent itself and more on the base compound it is added to, the process temperature and the working time you need before the material sets.
What this category covers
- Peroxide cure systems
- Addition (platinum) cure systems
- Agents for liquid silicone rubber processing
- Agents for solid silicone rubber processing
Typical applications
- Curing liquid silicone rubber systems
- Curing solid silicone rubber compounds
- Tuning cure speed for a given cycle
- Matching an existing cure system in production
What we confirm before quoting
These are the points that decide the grade. Sending them together shortens the first reply considerably.
| Parameter | What we need from you |
|---|---|
| Cure type | Peroxide or addition cure, and why that route was chosen |
| Active content | What the agent must deliver in your formulation |
| Dosage ratio | How the agent is dosed against the base compound |
| Curing temperature | The temperature your process actually reaches |
| Cure time | Cycle time the line needs to hit |
| Working time / pot life | Time available between mixing and shaping |
| Base compound compatibility | Which silicone base the agent is added to |
| Storage conditions | Temperature and humidity where it will be kept |
Values below are the parameters we confirm for every order. Exact figures are grade-specific and are confirmed against your application before quoting — no generic numbers are published here.
Information to include in your inquiry
- Application and the processing method you use
- Target properties — hardness, strength, temperature range
- Colour reference, if colour matters
- Packaging preference and estimated quantity
- Sample and documentation requirements
Other material categories
- Liquid Silicone RubberTwo-component liquid silicone for injection molding and liquid-injection processes.
- Solid Silicone RubberHigh-consistency solid silicone for compression molding, transfer molding and extrusion.
- Silicone OilSilicone fluids selected by viscosity, intended use and compatibility.
- Silicone Color PastePigment pastes matched to your silicone base, curing system and colour reference.
Send a material inquiry
Tell us the material category, application, target properties and estimated quantity.