Curing Agents — Technical Data
Peroxide and addition-cure systems matched to your base compound and process.
Specification parameters
The table lists every parameter we confirm for this material category. Figures are grade-specific, so the “confirmed per grade” column is filled in against your application rather than published as a generic range.
| Parameter | Typical value | Notes |
|---|---|---|
| Cure type | Confirmed per grade | Peroxide or addition cure, and why that route was chosen |
| Active content | Confirmed per grade | What the agent must deliver in your formulation |
| Dosage ratio | Confirmed per grade | How the agent is dosed against the base compound |
| Curing temperature | Confirmed per grade | The temperature your process actually reaches |
| Cure time | Confirmed per grade | Cycle time the line needs to hit |
| Working time / pot life | Confirmed per grade | Time available between mixing and shaping |
| Base compound compatibility | Confirmed per grade | Which silicone base the agent is added to |
| Storage conditions | Confirmed per grade | Temperature and humidity where it will be kept |
Packaging, storage and documentation
| Item | Detail |
|---|---|
| Supply form | Liquid or solid agent depending on the system |
| Packaging | Container format confirmed with the grade and order quantity |
| Storage | Follow the grade-specific storage conditions; keep sealed and away from heat |
| Documentation | Technical data and handling information on request |
Frequently asked
Can you match a curing system we already run?
Yes. Tell us the base compound, the current agent and your cycle. Matching an existing system is usually faster than specifying from scratch.
Why does working time matter so much?
It sets how long the mixed material stays workable. If it is shorter than your process step, the material sets before the part is formed.
Do curing agents need separate storage?
Storage conditions are grade-specific and are confirmed with the technical information for the product you are sent.
Send a material inquiry
Tell us the material category, application, target properties and estimated quantity.